Archive for: Project Examples

Modification and renewal of existing LDPE plants

1. February 2017/in Machine Dynamics, Pulsation Studies /by Sabine Kerk

Operational Modal Analysis expands KCE service range

1. February 2017/in Machine Dynamics /by Sabine Kerk

Buzzing noise of a heat exchanger

1. February 2017/in Machine Dynamics /by Sabine Kerk

Optimal phase shift = 15°!

13. December 2016/0 Comments/in Project Examples, Pulsation Studies /by Jessica Dirkes

Design of pulsation dampers: What is possible – what is not?

13. December 2016/0 Comments/in Project Examples, Pulsation Studies /by Jessica Dirkes

Design of a new pulsation damper for a root blower

13. December 2016/0 Comments/in Project Examples, Pulsation Studies /by Jessica Dirkes

Vibration problems at a 7 MW piston compressor

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Vibration isolation of centrifugal pumps

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Vibration reduction on cruise liners

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Vibration problems at a control oil pipeline in a power plant

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Torque measurement at a turbo compressor

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

New patent granted for a vibration damper system

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Natural gas storage at Lesum: Good pulsations

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Minus 170° C … and it works!

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Increased rotor vibrations at an axial turbo compressor

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Goodbye vibrations

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Finite element calculation of a supporting structure

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Effective combination of measurement and theory

Filling station with weighing problem

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Experiences with performance measurements at reciprocating compressors with pressure indication

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Commissioning test according to VDI 2045

Electric motor with extraordinary vibration behavior

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Dynamic torsion load too high?

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Coupling damage at a compressor of a LPG-tanker

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Compressor for ethylene kept quiet!

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Commissioning problems at a turbo compressor in Egypt

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Appearances are deceptive

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

8.5 MW generator string, stable or instable?

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

5 MW natural gas turbo compressor calmed down

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

”Swopper XT“ comfortably speeded up

13. December 2016/0 Comments/in Machine Dynamics, Project Examples /by Jessica Dirkes

Vibration problem at a 4.3 MW flue gas fan successfully solved

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Turbine flowmeters as “perpetuum mobile”?

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Strong knocking noise at a reciprocating compressor

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Measurement and analysis

Dizzy vibrations at a briquette plant in Russia

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Defective pressure valve – theory and practice

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Damages at a compensator in a flue gas duct of a desulfurization plant

12. December 2016/0 Comments/in Fluid Mechanics, Project Examples /by Jessica Dirkes

Analysis of damages by means of a 3D-flow simulation (CFD)